Enum diem_transaction_builder::stdlib::ScriptCall

pub enum ScriptCall {
    AddCurrencyToAccount {
        currency: TypeTag,
    },
    AddRecoveryRotationCapability {
        recovery_address: AccountAddress,
    },
    AddValidatorAndReconfigure {
        sliding_nonce: u64,
        validator_name: Vec<u8>,
        validator_address: AccountAddress,
    },
    Burn {
        token: TypeTag,
        sliding_nonce: u64,
        preburn_address: AccountAddress,
    },
    BurnTxnFees {
        coin_type: TypeTag,
    },
    CancelBurn {
        token: TypeTag,
        preburn_address: AccountAddress,
    },
    CreateChildVaspAccount {
        coin_type: TypeTag,
        child_address: AccountAddress,
        auth_key_prefix: Vec<u8>,
        add_all_currencies: bool,
        child_initial_balance: u64,
    },
    CreateDesignatedDealer {
        currency: TypeTag,
        sliding_nonce: u64,
        addr: AccountAddress,
        auth_key_prefix: Vec<u8>,
        human_name: Vec<u8>,
        add_all_currencies: bool,
    },
    CreateParentVaspAccount {
        coin_type: TypeTag,
        sliding_nonce: u64,
        new_account_address: AccountAddress,
        auth_key_prefix: Vec<u8>,
        human_name: Vec<u8>,
        add_all_currencies: bool,
    },
    CreateRecoveryAddress {},
    CreateValidatorAccount {
        sliding_nonce: u64,
        new_account_address: AccountAddress,
        auth_key_prefix: Vec<u8>,
        human_name: Vec<u8>,
    },
    CreateValidatorOperatorAccount {
        sliding_nonce: u64,
        new_account_address: AccountAddress,
        auth_key_prefix: Vec<u8>,
        human_name: Vec<u8>,
    },
    FreezeAccount {
        sliding_nonce: u64,
        to_freeze_account: AccountAddress,
    },
    PeerToPeerWithMetadata {
        currency: TypeTag,
        payee: AccountAddress,
        amount: u64,
        metadata: Vec<u8>,
        metadata_signature: Vec<u8>,
    },
    Preburn {
        token: TypeTag,
        amount: u64,
    },
    PublishSharedEd25519PublicKey {
        public_key: Vec<u8>,
    },
    RegisterValidatorConfig {
        validator_account: AccountAddress,
        consensus_pubkey: Vec<u8>,
        validator_network_addresses: Vec<u8>,
        fullnode_network_addresses: Vec<u8>,
    },
    RemoveValidatorAndReconfigure {
        sliding_nonce: u64,
        validator_name: Vec<u8>,
        validator_address: AccountAddress,
    },
    RotateAuthenticationKey {
        new_key: Vec<u8>,
    },
    RotateAuthenticationKeyWithNonce {
        sliding_nonce: u64,
        new_key: Vec<u8>,
    },
    RotateAuthenticationKeyWithNonceAdmin {
        sliding_nonce: u64,
        new_key: Vec<u8>,
    },
    RotateAuthenticationKeyWithRecoveryAddress {
        recovery_address: AccountAddress,
        to_recover: AccountAddress,
        new_key: Vec<u8>,
    },
    RotateDualAttestationInfo {
        new_url: Vec<u8>,
        new_key: Vec<u8>,
    },
    RotateSharedEd25519PublicKey {
        public_key: Vec<u8>,
    },
    SetValidatorConfigAndReconfigure {
        validator_account: AccountAddress,
        consensus_pubkey: Vec<u8>,
        validator_network_addresses: Vec<u8>,
        fullnode_network_addresses: Vec<u8>,
    },
    SetValidatorOperator {
        operator_name: Vec<u8>,
        operator_account: AccountAddress,
    },
    SetValidatorOperatorWithNonceAdmin {
        sliding_nonce: u64,
        operator_name: Vec<u8>,
        operator_account: AccountAddress,
    },
    TieredMint {
        coin_type: TypeTag,
        sliding_nonce: u64,
        designated_dealer_address: AccountAddress,
        mint_amount: u64,
        tier_index: u64,
    },
    UnfreezeAccount {
        sliding_nonce: u64,
        to_unfreeze_account: AccountAddress,
    },
    UpdateDiemVersion {
        sliding_nonce: u64,
        major: u64,
    },
    UpdateDualAttestationLimit {
        sliding_nonce: u64,
        new_micro_xdx_limit: u64,
    },
    UpdateExchangeRate {
        currency: TypeTag,
        sliding_nonce: u64,
        new_exchange_rate_numerator: u64,
        new_exchange_rate_denominator: u64,
    },
    UpdateMintingAbility {
        currency: TypeTag,
        allow_minting: bool,
    },
}

Structured representation of a call into a known Move script.

impl ScriptCall {
    pub fn encode(self) -> Script { .. }
    pub fn decode(&Script) -> Option<ScriptCall> { .. }
}

Variants

AddCurrencyToAccount

Fields

currency: TypeTag

Summary

Adds a zero Currency balance to the sending account. This will enable account to send, receive, and hold Diem::Diem<Currency> coins. This transaction can be successfully sent by any account that is allowed to hold balances (e.g., VASP, Designated Dealer).

Technical Description

After the successful execution of this transaction the sending account will have a DiemAccount::Balance<Currency> resource with zero balance published under it. Only accounts that can hold balances can send this transaction, the sending account cannot already have a DiemAccount::Balance<Currency> published under it.

Parameters

Name	Type	Description
Currency	Type	The Move type for the Currency being added to the sending account of the transaction. Currency must be an already-registered currency on-chain.
account	&signer	The signer of the sending account of the transaction.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The Currency is not a registered currency on-chain.
Errors::INVALID_ARGUMENT	DiemAccount::EROLE_CANT_STORE_BALANCE	The sending account’s role does not permit balances.
Errors::ALREADY_PUBLISHED	DiemAccount::EADD_EXISTING_CURRENCY	A balance for Currency is already published under the sending account.

Related Scripts

• Script::create_child_vasp_account
• Script::create_parent_vasp_account
• Script::peer_to_peer_with_metadata

AddRecoveryRotationCapability

Fields

recovery_address: AccountAddress

Summary

Stores the sending accounts ability to rotate its authentication key with a designated recovery account. Both the sending and recovery accounts need to belong to the same VASP and both be VASP accounts. After this transaction both the sending account and the specified recovery account can rotate the sender account’s authentication key.

Technical Description

Adds the DiemAccount::KeyRotationCapability for the sending account (to_recover_account) to the RecoveryAddress::RecoveryAddress resource under recovery_address. After this transaction has been executed successfully the account at recovery_address and the to_recover_account may rotate the authentication key of to_recover_account (the sender of this transaction).

The sending account of this transaction (to_recover_account) must not have previously given away its unique key rotation capability, and must be a VASP account. The account at recovery_address must also be a VASP account belonging to the same VASP as the to_recover_account. Additionally the account at recovery_address must have already initialized itself as a recovery account address using the Script::create_recovery_address transaction script.

The sending account’s (to_recover_account) key rotation capability is removed in this transaction and stored in the RecoveryAddress::RecoveryAddress resource stored under the account at recovery_address.

Parameters

Name	Type	Description
to_recover_account	&signer	The signer reference of the sending account of this transaction.
recovery_address	address	The account address where the to_recover_account’s DiemAccount::KeyRotationCapability will be stored.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::INVALID_STATE	DiemAccount::EKEY_ROTATION_CAPABILITY_ALREADY_EXTRACTED	to_recover_account has already delegated/extracted its DiemAccount::KeyRotationCapability.
Errors::NOT_PUBLISHED	RecoveryAddress::ERECOVERY_ADDRESS	recovery_address does not have a RecoveryAddress resource published under it.
Errors::INVALID_ARGUMENT	RecoveryAddress::EINVALID_KEY_ROTATION_DELEGATION	to_recover_account and recovery_address do not belong to the same VASP.
Errors::LIMIT_EXCEEDED	RecoveryAddress::EMAX_KEYS_REGISTERED	RecoveryAddress::MAX_REGISTERED_KEYS have already been registered with this recovery_address.

Related Scripts

• Script::create_recovery_address
• Script::rotate_authentication_key_with_recovery_address

AddValidatorAndReconfigure

Fields

sliding_nonce: u64

validator_name: Vec<u8>

validator_address: AccountAddress

Summary

Adds a validator account to the validator set, and triggers a reconfiguration of the system to admit the account to the validator set for the system. This transaction can only be successfully called by the Diem Root account.

Technical Description

This script adds the account at validator_address to the validator set. This transaction emits a DiemConfig::NewEpochEvent event and triggers a reconfiguration. Once the reconfiguration triggered by this script’s execution has been performed, the account at the validator_address is considered to be a validator in the network.

This transaction script will fail if the validator_address address is already in the validator set or does not have a ValidatorConfig::ValidatorConfig resource already published under it.

Parameters

Name	Type	Description
dr_account	&signer	The signer reference of the sending account of this transaction. Must be the Diem Root signer.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
validator_name	vector<u8>	ASCII-encoded human name for the validator. Must match the human name in the ValidatorConfig::ValidatorConfig for the validator.
validator_address	address	The validator account address to be added to the validator set.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under dr_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::REQUIRES_ROLE	Roles::EDIEM_ROOT	The sending account is not the Diem Root account.
0	0	The provided validator_name does not match the already-recorded human name for the validator.
Errors::INVALID_ARGUMENT	DiemSystem::EINVALID_PROSPECTIVE_VALIDATOR	The validator to be added does not have a ValidatorConfig::ValidatorConfig resource published under it, or its config field is empty.
Errors::INVALID_ARGUMENT	DiemSystem::EALREADY_A_VALIDATOR	The validator_address account is already a registered validator.
Errors::INVALID_STATE	DiemConfig::EINVALID_BLOCK_TIME	An invalid time value was encountered in reconfiguration. Unlikely to occur.

Related Scripts

• Script::create_validator_account
• Script::create_validator_operator_account
• Script::register_validator_config
• Script::remove_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_operator_with_nonce_admin
• Script::set_validator_config_and_reconfigure

Burn

Fields

token: TypeTag

sliding_nonce: u64

preburn_address: AccountAddress

Summary

Burns all coins held in the preburn resource at the specified preburn address and removes them from the system. The sending account must be the Treasury Compliance account. The account that holds the preburn resource will normally be a Designated Dealer, but there are no enforced requirements that it be one.

Technical Description

This transaction permanently destroys all the coins of Token type stored in the Diem::Preburn<Token> resource published under the preburn_address account address.

This transaction will only succeed if the sending account has a Diem::BurnCapability<Token>, and a Diem::Preburn<Token> resource exists under preburn_address, with a non-zero to_burn field. After the successful execution of this transaction the total_value field in the Diem::CurrencyInfo<Token> resource published under 0xA550C18 will be decremented by the value of the to_burn field of the preburn resource under preburn_address immediately before this transaction, and the to_burn field of the preburn resource will have a zero value.

Events

The successful execution of this transaction will emit a Diem::BurnEvent on the event handle held in the Diem::CurrencyInfo<Token> resource’s burn_events published under 0xA550C18.

Parameters

Name	Type	Description
Token	Type	The Move type for the Token currency being burned. Token must be an already-registered currency on-chain.
tc_account	&signer	The signer reference of the sending account of this transaction, must have a burn capability for Token published under it.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
preburn_address	address	The address where the coins to-be-burned are currently held.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_CAPABILITY	Diem::EBURN_CAPABILITY	The sending account does not have a Diem::BurnCapability<Token> published under it.
Errors::NOT_PUBLISHED	Diem::EPREBURN	The account at preburn_address does not have a Diem::Preburn<Token> resource published under it.
Errors::INVALID_STATE	Diem::EPREBURN_EMPTY	The Diem::Preburn<Token> resource is empty (has a value of 0).
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The specified Token is not a registered currency on-chain.

Related Scripts

• Script::burn_txn_fees
• Script::cancel_burn
• Script::preburn

BurnTxnFees

Fields

coin_type: TypeTag

Summary

Burns the transaction fees collected in the CoinType currency so that the Diem association may reclaim the backing coins off-chain. May only be sent by the Treasury Compliance account.

Technical Description

Burns the transaction fees collected in CoinType so that the association may reclaim the backing coins. Once this transaction has executed successfully all transaction fees that will have been collected in CoinType since the last time this script was called with that specific currency. Both balance and preburn fields in the TransactionFee::TransactionFee<CoinType> resource published under the 0xB1E55ED account address will have a value of 0 after the successful execution of this script.

Events

The successful execution of this transaction will emit a Diem::BurnEvent on the event handle held in the Diem::CurrencyInfo<CoinType> resource’s burn_events published under 0xA550C18.

Parameters

Name	Type	Description
CoinType	Type	The Move type for the CoinType being added to the sending account of the transaction. CoinType must be an already-registered currency on-chain.
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::NOT_PUBLISHED	TransactionFee::ETRANSACTION_FEE	CoinType is not an accepted transaction fee currency.
Errors::INVALID_ARGUMENT	Diem::ECOIN	The collected fees in CoinType are zero.

Related Scripts

• Script::burn
• Script::cancel_burn

CancelBurn

Fields

token: TypeTag

preburn_address: AccountAddress

Summary

Cancels and returns all coins held in the preburn area under preburn_address and returns the funds to the preburn_address’s balance. Can only be successfully sent by an account with Treasury Compliance role.

Technical Description

Cancels and returns all coins held in the Diem::Preburn<Token> resource under the preburn_address and return the funds to the preburn_address account’s DiemAccount::Balance<Token>. The transaction must be sent by an account with a Diem::BurnCapability<Token> resource published under it. The account at preburn_address must have a Diem::Preburn<Token> resource published under it, and its value must be nonzero. The transaction removes the entire balance held in the Diem::Preburn<Token> resource, and returns it back to the account’s DiemAccount::Balance<Token> under preburn_address. Due to this, the account at preburn_address must already have a balance in the Token currency published before this script is called otherwise the transaction will fail.

Events

The successful execution of this transaction will emit:

• A Diem::CancelBurnEvent on the event handle held in the Diem::CurrencyInfo<Token> resource’s burn_events published under 0xA550C18.
• A DiemAccount::ReceivedPaymentEvent on the preburn_address’s DiemAccount::DiemAccount received_events event handle with both the payer and payee being preburn_address.

Parameters

Name	Type	Description
Token	Type	The Move type for the Token currenty that burning is being cancelled for. Token must be an already-registered currency on-chain.
account	&signer	The signer reference of the sending account of this transaction, must have a burn capability for Token published under it.
preburn_address	address	The address where the coins to-be-burned are currently held.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::REQUIRES_CAPABILITY	Diem::EBURN_CAPABILITY	The sending account does not have a Diem::BurnCapability<Token> published under it.
Errors::NOT_PUBLISHED	Diem::EPREBURN	The account at preburn_address does not have a Diem::Preburn<Token> resource published under it.
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The specified Token is not a registered currency on-chain.
Errors::INVALID_ARGUMENT	DiemAccount::ECOIN_DEPOSIT_IS_ZERO	The value held in the preburn resource was zero.
Errors::INVALID_ARGUMENT	DiemAccount::EPAYEE_CANT_ACCEPT_CURRENCY_TYPE	The account at preburn_address doesn’t have a balance resource for Token.
Errors::LIMIT_EXCEEDED	DiemAccount::EDEPOSIT_EXCEEDS_LIMITS	The depositing of the funds held in the prebun area would exceed the account’s account limits.
Errors::INVALID_STATE	DualAttestation::EPAYEE_COMPLIANCE_KEY_NOT_SET	The account does not have a compliance key set on it but dual attestion checking was performed.

Related Scripts

• Script::burn_txn_fees
• Script::burn
• Script::preburn

CreateChildVaspAccount

Fields

coin_type: TypeTag

child_address: AccountAddress

auth_key_prefix: Vec<u8>

add_all_currencies: bool

child_initial_balance: u64

Summary

Creates a Child VASP account with its parent being the sending account of the transaction. The sender of the transaction must be a Parent VASP account.

Technical Description

Creates a ChildVASP account for the sender parent_vasp at child_address with a balance of child_initial_balance in CoinType and an initial authentication key of auth_key_prefix | child_address.

If add_all_currencies is true, the child address will have a zero balance in all available currencies in the system.

The new account will be a child account of the transaction sender, which must be a Parent VASP account. The child account will be recorded against the limit of child accounts of the creating Parent VASP account.

Events

Successful execution with a child_initial_balance greater than zero will emit:

• A DiemAccount::SentPaymentEvent with the payer field being the Parent VASP’s address, and payee field being child_address. This is emitted on the Parent VASP’s DiemAccount::DiemAccount sent_events handle.
• A DiemAccount::ReceivedPaymentEvent with the payer field being the Parent VASP’s address, and payee field being child_address. This is emitted on the new Child VASPS’s DiemAccount::DiemAccount received_events handle.

Parameters

Name	Type	Description
CoinType	Type	The Move type for the CoinType that the child account should be created with. CoinType must be an already-registered currency on-chain.
parent_vasp	&signer	The signer reference of the sending account. Must be a Parent VASP account.
child_address	address	Address of the to-be-created Child VASP account.
auth_key_prefix	vector<u8>	The authentication key prefix that will be used initially for the newly created account.
add_all_currencies	bool	Whether to publish balance resources for all known currencies when the account is created.
child_initial_balance	u64	The initial balance in CoinType to give the child account when it’s created.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::INVALID_ARGUMENT	DiemAccount::EMALFORMED_AUTHENTICATION_KEY	The auth_key_prefix was not of length 32.
Errors::REQUIRES_ROLE	Roles::EPARENT_VASP	The sending account wasn’t a Parent VASP account.
Errors::ALREADY_PUBLISHED	Roles::EROLE_ID	The child_address address is already taken.
Errors::LIMIT_EXCEEDED	VASP::ETOO_MANY_CHILDREN	The sending account has reached the maximum number of allowed child accounts.
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The CoinType is not a registered currency on-chain.
Errors::INVALID_STATE	DiemAccount::EWITHDRAWAL_CAPABILITY_ALREADY_EXTRACTED	The withdrawal capability for the sending account has already been extracted.
Errors::NOT_PUBLISHED	DiemAccount::EPAYER_DOESNT_HOLD_CURRENCY	The sending account doesn’t have a balance in CoinType.
Errors::LIMIT_EXCEEDED	DiemAccount::EINSUFFICIENT_BALANCE	The sending account doesn’t have at least child_initial_balance of CoinType balance.
Errors::INVALID_ARGUMENT	DiemAccount::ECANNOT_CREATE_AT_VM_RESERVED	The child_address is the reserved address 0x0.

Related Scripts

• Script::create_parent_vasp_account
• Script::add_currency_to_account
• Script::rotate_authentication_key
• Script::add_recovery_rotation_capability
• Script::create_recovery_address

CreateDesignatedDealer

Fields

currency: TypeTag

sliding_nonce: u64

addr: AccountAddress

auth_key_prefix: Vec<u8>

human_name: Vec<u8>

add_all_currencies: bool

Summary

Creates a Designated Dealer account with the provided information, and initializes it with default mint tiers. The transaction can only be sent by the Treasury Compliance account.

Technical Description

Creates an account with the Designated Dealer role at addr with authentication key auth_key_prefix | addr and a 0 balance of type Currency. If add_all_currencies is true, 0 balances for all available currencies in the system will also be added. This can only be invoked by an account with the TreasuryCompliance role.

At the time of creation the account is also initialized with default mint tiers of (500_000, 5000_000, 50_000_000, 500_000_000), and preburn areas for each currency that is added to the account.

Parameters

Name	Type	Description
Currency	Type	The Move type for the Currency that the Designated Dealer should be initialized with. Currency must be an already-registered currency on-chain.
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
addr	address	Address of the to-be-created Designated Dealer account.
auth_key_prefix	vector<u8>	The authentication key prefix that will be used initially for the newly created account.
human_name	vector<u8>	ASCII-encoded human name for the Designated Dealer.
add_all_currencies	bool	Whether to publish preburn, balance, and tier info resources for all known (SCS) currencies or just Currency when the account is created.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under tc_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::REQUIRES_ROLE	Roles::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The Currency is not a registered currency on-chain.
Errors::ALREADY_PUBLISHED	Roles::EROLE_ID	The addr address is already taken.

Related Scripts

• Script::tiered_mint
• Script::peer_to_peer_with_metadata
• Script::rotate_dual_attestation_info

CreateParentVaspAccount

Fields

coin_type: TypeTag

sliding_nonce: u64

new_account_address: AccountAddress

auth_key_prefix: Vec<u8>

human_name: Vec<u8>

add_all_currencies: bool

Summary

Creates a Parent VASP account with the specified human name. Must be called by the Treasury Compliance account.

Technical Description

Creates an account with the Parent VASP role at address with authentication key auth_key_prefix | new_account_address and a 0 balance of type CoinType. If add_all_currencies is true, 0 balances for all available currencies in the system will also be added. This can only be invoked by an TreasuryCompliance account. sliding_nonce is a unique nonce for operation, see SlidingNonce for details.

Parameters

Name	Type	Description
CoinType	Type	The Move type for the CoinType currency that the Parent VASP account should be initialized with. CoinType must be an already-registered currency on-chain.
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
new_account_address	address	Address of the to-be-created Parent VASP account.
auth_key_prefix	vector<u8>	The authentication key prefix that will be used initially for the newly created account.
human_name	vector<u8>	ASCII-encoded human name for the Parent VASP.
add_all_currencies	bool	Whether to publish balance resources for all known currencies when the account is created.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under tc_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::REQUIRES_ROLE	Roles::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The CoinType is not a registered currency on-chain.
Errors::ALREADY_PUBLISHED	Roles::EROLE_ID	The new_account_address address is already taken.

Related Scripts

• Script::create_child_vasp_account
• Script::add_currency_to_account
• Script::rotate_authentication_key
• Script::add_recovery_rotation_capability
• Script::create_recovery_address
• Script::rotate_dual_attestation_info

CreateRecoveryAddress

Fields

Summary

Initializes the sending account as a recovery address that may be used by the VASP that it belongs to. The sending account must be a VASP account. Multiple recovery addresses can exist for a single VASP, but accounts in each must be disjoint.

Technical Description

Publishes a RecoveryAddress::RecoveryAddress resource under account. It then extracts the DiemAccount::KeyRotationCapability for account and adds it to the resource. After the successful execution of this transaction other accounts may add their key rotation to this resource so that account may be used as a recovery account for those accounts.

Parameters

Name	Type	Description
account	&signer	The signer of the sending account of the transaction.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::INVALID_STATE	DiemAccount::EKEY_ROTATION_CAPABILITY_ALREADY_EXTRACTED	account has already delegated/extracted its DiemAccount::KeyRotationCapability.
Errors::INVALID_ARGUMENT	RecoveryAddress::ENOT_A_VASP	account is not a VASP account.
Errors::INVALID_ARGUMENT	RecoveryAddress::EKEY_ROTATION_DEPENDENCY_CYCLE	A key rotation recovery cycle would be created by adding account’s key rotation capability.
Errors::ALREADY_PUBLISHED	RecoveryAddress::ERECOVERY_ADDRESS	A RecoveryAddress::RecoveryAddress resource has already been published under account.

Related Scripts

• Script::add_recovery_rotation_capability
• Script::rotate_authentication_key_with_recovery_address

CreateValidatorAccount

Fields

sliding_nonce: u64

new_account_address: AccountAddress

auth_key_prefix: Vec<u8>

human_name: Vec<u8>

Summary

Creates a Validator account. This transaction can only be sent by the Diem Root account.

Technical Description

Creates an account with a Validator role at new_account_address, with authentication key auth_key_prefix | new_account_address. It publishes a ValidatorConfig::ValidatorConfig resource with empty config, and operator_account fields. The human_name field of the ValidatorConfig::ValidatorConfig is set to the passed in human_name. This script does not add the validator to the validator set or the system, but only creates the account.

Parameters

Name	Type	Description
dr_account	&signer	The signer reference of the sending account of this transaction. Must be the Diem Root signer.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
new_account_address	address	Address of the to-be-created Validator account.
auth_key_prefix	vector<u8>	The authentication key prefix that will be used initially for the newly created account.
human_name	vector<u8>	ASCII-encoded human name for the validator.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under dr_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::REQUIRES_ROLE	Roles::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::ALREADY_PUBLISHED	Roles::EROLE_ID	The new_account_address address is already taken.

Related Scripts

• Script::add_validator_and_reconfigure
• Script::create_validator_operator_account
• Script::register_validator_config
• Script::remove_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_operator_with_nonce_admin
• Script::set_validator_config_and_reconfigure

CreateValidatorOperatorAccount

Fields

sliding_nonce: u64

new_account_address: AccountAddress

auth_key_prefix: Vec<u8>

human_name: Vec<u8>

Summary

Creates a Validator Operator account. This transaction can only be sent by the Diem Root account.

Technical Description

Creates an account with a Validator Operator role at new_account_address, with authentication key auth_key_prefix | new_account_address. It publishes a ValidatorOperatorConfig::ValidatorOperatorConfig resource with the specified human_name. This script does not assign the validator operator to any validator accounts but only creates the account.

Parameters

Name	Type	Description
dr_account	&signer	The signer reference of the sending account of this transaction. Must be the Diem Root signer.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
new_account_address	address	Address of the to-be-created Validator account.
auth_key_prefix	vector<u8>	The authentication key prefix that will be used initially for the newly created account.
human_name	vector<u8>	ASCII-encoded human name for the validator.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under dr_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::REQUIRES_ROLE	Roles::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::ALREADY_PUBLISHED	Roles::EROLE_ID	The new_account_address address is already taken.

Related Scripts

• Script::create_validator_account
• Script::add_validator_and_reconfigure
• Script::register_validator_config
• Script::remove_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_operator_with_nonce_admin
• Script::set_validator_config_and_reconfigure

FreezeAccount

Fields

sliding_nonce: u64

to_freeze_account: AccountAddress

Summary

Freezes the account at address. The sending account of this transaction must be the Treasury Compliance account. The account being frozen cannot be the Diem Root or Treasury Compliance account. After the successful execution of this transaction no transactions may be sent from the frozen account, and the frozen account may not send or receive coins.

Technical Description

Sets the AccountFreezing::FreezingBit to true and emits a AccountFreezing::FreezeAccountEvent. The transaction sender must be the Treasury Compliance account, but the account at to_freeze_account must not be either 0xA550C18 (the Diem Root address), or 0xB1E55ED (the Treasury Compliance address). Note that this is a per-account property e.g., freezing a Parent VASP will not effect the status any of its child accounts and vice versa.

Events

Successful execution of this transaction will emit a AccountFreezing::FreezeAccountEvent on the freeze_event_handle held in the AccountFreezing::FreezeEventsHolder resource published under 0xA550C18 with the frozen_address being the to_freeze_account.

Parameters

Name	Type	Description
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
to_freeze_account	address	The account address to be frozen.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under tc_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::REQUIRES_ROLE	Roles::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.
Errors::INVALID_ARGUMENT	AccountFreezing::ECANNOT_FREEZE_TC	to_freeze_account was the Treasury Compliance account (0xB1E55ED).
Errors::INVALID_ARGUMENT	AccountFreezing::ECANNOT_FREEZE_DIEM_ROOT	to_freeze_account was the Diem Root account (0xA550C18).

Related Scripts

• Script::unfreeze_account

PeerToPeerWithMetadata

Fields

currency: TypeTag

payee: AccountAddress

amount: u64

metadata: Vec<u8>

metadata_signature: Vec<u8>

Summary

Transfers a given number of coins in a specified currency from one account to another. Transfers over a specified amount defined on-chain that are between two different VASPs, or other accounts that have opted-in will be subject to on-chain checks to ensure the receiver has agreed to receive the coins. This transaction can be sent by any account that can hold a balance, and to any account that can hold a balance. Both accounts must hold balances in the currency being transacted.

Technical Description

Transfers amount coins of type Currency from payer to payee with (optional) associated metadata and an (optional) metadata_signature on the message metadata | Signer::address_of(payer) | amount | DualAttestation::DOMAIN_SEPARATOR. The metadata and metadata_signature parameters are only required if amount >= DualAttestation::get_cur_microdiem_limit XDX and payer and payee are distinct VASPs. However, a transaction sender can opt in to dual attestation even when it is not required (e.g., a DesignatedDealer -> VASP payment) by providing a non-empty metadata_signature. Standardized metadata BCS format can be found in diem_types::transaction::metadata::Metadata.

Events

Successful execution of this script emits two events:

• A DiemAccount::SentPaymentEvent on payer’s DiemAccount::DiemAccount sent_events handle; and
• A DiemAccount::ReceivedPaymentEvent on payee’s DiemAccount::DiemAccount received_events handle.

Parameters

Name	Type	Description
Currency	Type	The Move type for the Currency being sent in this transaction. Currency must be an already-registered currency on-chain.
payer	&signer	The signer reference of the sending account that coins are being transferred from.
payee	address	The address of the account the coins are being transferred to.
metadata	vector<u8>	Optional metadata about this payment.
metadata_signature	vector<u8>	Optional signature over metadata and payment information. See

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	DiemAccount::EPAYER_DOESNT_HOLD_CURRENCY	payer doesn’t hold a balance in Currency.
Errors::LIMIT_EXCEEDED	DiemAccount::EINSUFFICIENT_BALANCE	amount is greater than payer’s balance in Currency.
Errors::INVALID_ARGUMENT	DiemAccount::ECOIN_DEPOSIT_IS_ZERO	amount is zero.
Errors::NOT_PUBLISHED	DiemAccount::EPAYEE_DOES_NOT_EXIST	No account exists at the payee address.
Errors::INVALID_ARGUMENT	DiemAccount::EPAYEE_CANT_ACCEPT_CURRENCY_TYPE	An account exists at payee, but it does not accept payments in Currency.
Errors::INVALID_STATE	AccountFreezing::EACCOUNT_FROZEN	The payee account is frozen.
Errors::INVALID_ARGUMENT	DualAttestation::EMALFORMED_METADATA_SIGNATURE	metadata_signature is not 64 bytes.
Errors::INVALID_ARGUMENT	DualAttestation::EINVALID_METADATA_SIGNATURE	metadata_signature does not verify on the against the payee's DualAttestation::Credential compliance_public_key public key.
Errors::LIMIT_EXCEEDED	DiemAccount::EWITHDRAWAL_EXCEEDS_LIMITS	payer has exceeded its daily withdrawal limits for the backing coins of XDX.
Errors::LIMIT_EXCEEDED	DiemAccount::EDEPOSIT_EXCEEDS_LIMITS	payee has exceeded its daily deposit limits for XDX.

Related Scripts

• Script::create_child_vasp_account
• Script::create_parent_vasp_account
• Script::add_currency_to_account

Preburn

Fields

token: TypeTag

amount: u64

Summary

Moves a specified number of coins in a given currency from the account’s balance to its preburn area after which the coins may be burned. This transaction may be sent by any account that holds a balance and preburn area in the specified currency.

Technical Description

Moves the specified amount of coins in Token currency from the sending account’s DiemAccount::Balance<Token> to the Diem::Preburn<Token> published under the same account. account must have both of these resources published under it at the start of this transaction in order for it to execute successfully.

Events

Successful execution of this script emits two events:

• DiemAccount::SentPaymentEvent on account’s DiemAccount::DiemAccount sent_events handle with the payee and payer fields being account’s address; and
• A Diem::PreburnEvent with Token’s currency code on the Diem::CurrencyInfo<Token’s preburn_events handle for Token and with preburn_address set to account’s address.

Parameters

Name	Type	Description
Token	Type	The Move type for the Token currency being moved to the preburn area. Token must be an already-registered currency on-chain.
account	&signer	The signer reference of the sending account.
amount	u64	The amount in Token to be moved to the preburn area.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	The Token is not a registered currency on-chain.
Errors::INVALID_STATE	DiemAccount::EWITHDRAWAL_CAPABILITY_ALREADY_EXTRACTED	The withdrawal capability for account has already been extracted.
Errors::LIMIT_EXCEEDED	DiemAccount::EINSUFFICIENT_BALANCE	amount is greater than payer’s balance in Token.
Errors::NOT_PUBLISHED	DiemAccount::EPAYER_DOESNT_HOLD_CURRENCY	account doesn’t hold a balance in Token.
Errors::NOT_PUBLISHED	Diem::EPREBURN	account doesn’t have a Diem::Preburn<Token> resource published under it.
Errors::INVALID_STATE	Diem::EPREBURN_OCCUPIED	The value field in the Diem::Preburn<Token> resource under the sender is non-zero.
Errors::NOT_PUBLISHED	Roles::EROLE_ID	The account did not have a role assigned to it.
Errors::REQUIRES_ROLE	Roles::EDESIGNATED_DEALER	The account did not have the role of DesignatedDealer.

Related Scripts

• Script::cancel_burn
• Script::burn
• Script::burn_txn_fees

PublishSharedEd25519PublicKey

Fields

public_key: Vec<u8>

Summary

Rotates the authentication key of the sending account to the newly-specified public key and publishes a new shared authentication key under the sender’s account. Any account can send this transaction.

Technical Description

Rotates the authentication key of the sending account to public_key, and publishes a SharedEd25519PublicKey::SharedEd25519PublicKey resource containing the 32-byte ed25519 public_key and the DiemAccount::KeyRotationCapability for account under account.

Parameters

Name	Type	Description
account	&signer	The signer reference of the sending account of the transaction.
public_key	vector<u8>	32-byte Ed25519 public key for account’ authentication key to be rotated to and stored.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::INVALID_STATE	DiemAccount::EKEY_ROTATION_CAPABILITY_ALREADY_EXTRACTED	account has already delegated/extracted its DiemAccount::KeyRotationCapability resource.
Errors::ALREADY_PUBLISHED	SharedEd25519PublicKey::ESHARED_KEY	The SharedEd25519PublicKey::SharedEd25519PublicKey resource is already published under account.
Errors::INVALID_ARGUMENT	SharedEd25519PublicKey::EMALFORMED_PUBLIC_KEY	public_key is an invalid ed25519 public key.

Related Scripts

• Script::rotate_shared_ed25519_public_key

RegisterValidatorConfig

Fields

validator_account: AccountAddress

consensus_pubkey: Vec<u8>

validator_network_addresses: Vec<u8>

fullnode_network_addresses: Vec<u8>

Summary

Updates a validator’s configuration. This does not reconfigure the system and will not update the configuration in the validator set that is seen by other validators in the network. Can only be successfully sent by a Validator Operator account that is already registered with a validator.

Technical Description

This updates the fields with corresponding names held in the ValidatorConfig::ValidatorConfig config resource held under validator_account. It does not emit a DiemConfig::NewEpochEvent so the copy of this config held in the validator set will not be updated, and the changes are only “locally” under the validator_account account address.

Parameters

Name	Type	Description
validator_operator_account	&signer	Signer reference of the sending account. Must be the registered validator operator for the validator at validator_address.
validator_account	address	The address of the validator’s ValidatorConfig::ValidatorConfig resource being updated.
consensus_pubkey	vector<u8>	New Ed25519 public key to be used in the updated ValidatorConfig::ValidatorConfig.
validator_network_addresses	vector<u8>	New set of validator_network_addresses to be used in the updated ValidatorConfig::ValidatorConfig.
fullnode_network_addresses	vector<u8>	New set of fullnode_network_addresses to be used in the updated ValidatorConfig::ValidatorConfig.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	ValidatorConfig::EVALIDATOR_CONFIG	validator_address does not have a ValidatorConfig::ValidatorConfig resource published under it.
Errors::INVALID_ARGUMENT	ValidatorConfig::EINVALID_TRANSACTION_SENDER	validator_operator_account is not the registered operator for the validator at validator_address.
Errors::INVALID_ARGUMENT	ValidatorConfig::EINVALID_CONSENSUS_KEY	consensus_pubkey is not a valid ed25519 public key.

Related Scripts

• Script::create_validator_account
• Script::create_validator_operator_account
• Script::add_validator_and_reconfigure
• Script::remove_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_operator_with_nonce_admin
• Script::set_validator_config_and_reconfigure

RemoveValidatorAndReconfigure

Fields

sliding_nonce: u64

validator_name: Vec<u8>

validator_address: AccountAddress

Summary

This script removes a validator account from the validator set, and triggers a reconfiguration of the system to remove the validator from the system. This transaction can only be successfully called by the Diem Root account.

Technical Description

This script removes the account at validator_address from the validator set. This transaction emits a DiemConfig::NewEpochEvent event. Once the reconfiguration triggered by this event has been performed, the account at validator_address is no longer considered to be a validator in the network. This transaction will fail if the validator at validator_address is not in the validator set.

Parameters

Name	Type	Description
dr_account	&signer	The signer reference of the sending account of this transaction. Must be the Diem Root signer.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
validator_name	vector<u8>	ASCII-encoded human name for the validator. Must match the human name in the ValidatorConfig::ValidatorConfig for the validator.
validator_address	address	The validator account address to be removed from the validator set.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under dr_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	The sending account is not the Diem Root account or Treasury Compliance account
0	0	The provided validator_name does not match the already-recorded human name for the validator.
Errors::INVALID_ARGUMENT	DiemSystem::ENOT_AN_ACTIVE_VALIDATOR	The validator to be removed is not in the validator set.
Errors::REQUIRES_ADDRESS	CoreAddresses::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::REQUIRES_ROLE	Roles::EDIEM_ROOT	The sending account is not the Diem Root account.
Errors::INVALID_STATE	DiemConfig::EINVALID_BLOCK_TIME	An invalid time value was encountered in reconfiguration. Unlikely to occur.

Related Scripts

• Script::create_validator_account
• Script::create_validator_operator_account
• Script::register_validator_config
• Script::add_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_operator_with_nonce_admin
• Script::set_validator_config_and_reconfigure

RotateAuthenticationKey

Fields

new_key: Vec<u8>

Summary

Rotates the transaction sender’s authentication key to the supplied new authentication key. May be sent by any account.

Technical Description

Rotate the account’s DiemAccount::DiemAccount authentication_key field to new_key. new_key must be a valid ed25519 public key, and account must not have previously delegated its DiemAccount::KeyRotationCapability.

Parameters

Name	Type	Description
account	&signer	Signer reference of the sending account of the transaction.
new_key	vector<u8>	New ed25519 public key to be used for account.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::INVALID_STATE	DiemAccount::EKEY_ROTATION_CAPABILITY_ALREADY_EXTRACTED	account has already delegated/extracted its DiemAccount::KeyRotationCapability.
Errors::INVALID_ARGUMENT	DiemAccount::EMALFORMED_AUTHENTICATION_KEY	new_key was an invalid length.

Related Scripts

• Script::rotate_authentication_key_with_nonce
• Script::rotate_authentication_key_with_nonce_admin
• Script::rotate_authentication_key_with_recovery_address

RotateAuthenticationKeyWithNonce

Fields

sliding_nonce: u64

new_key: Vec<u8>

Summary

Rotates the sender’s authentication key to the supplied new authentication key. May be sent by any account that has a sliding nonce resource published under it (usually this is Treasury Compliance or Diem Root accounts).

Technical Description

Rotates the account’s DiemAccount::DiemAccount authentication_key field to new_key. new_key must be a valid ed25519 public key, and account must not have previously delegated its DiemAccount::KeyRotationCapability.

Parameters

Name	Type	Description
account	&signer	Signer reference of the sending account of the transaction.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
new_key	vector<u8>	New ed25519 public key to be used for account.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::INVALID_STATE	DiemAccount::EKEY_ROTATION_CAPABILITY_ALREADY_EXTRACTED	account has already delegated/extracted its DiemAccount::KeyRotationCapability.
Errors::INVALID_ARGUMENT	DiemAccount::EMALFORMED_AUTHENTICATION_KEY	new_key was an invalid length.

Related Scripts

• Script::rotate_authentication_key
• Script::rotate_authentication_key_with_nonce_admin
• Script::rotate_authentication_key_with_recovery_address

RotateAuthenticationKeyWithNonceAdmin

Fields

sliding_nonce: u64

new_key: Vec<u8>

Summary

Rotates the specified account’s authentication key to the supplied new authentication key. May only be sent by the Diem Root account as a write set transaction.

Technical Description

Rotate the account’s DiemAccount::DiemAccount authentication_key field to new_key. new_key must be a valid ed25519 public key, and account must not have previously delegated its DiemAccount::KeyRotationCapability.

Parameters

Name	Type	Description
dr_account	&signer	The signer reference of the sending account of the write set transaction. May only be the Diem Root signer.
account	&signer	Signer reference of account specified in the execute_as field of the write set transaction.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction for Diem Root.
new_key	vector<u8>	New ed25519 public key to be used for account.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under dr_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce in dr_account is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce in dr_account is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce in dr_account has been previously recorded.
Errors::INVALID_STATE	DiemAccount::EKEY_ROTATION_CAPABILITY_ALREADY_EXTRACTED	account has already delegated/extracted its DiemAccount::KeyRotationCapability.
Errors::INVALID_ARGUMENT	DiemAccount::EMALFORMED_AUTHENTICATION_KEY	new_key was an invalid length.

Related Scripts

• Script::rotate_authentication_key
• Script::rotate_authentication_key_with_nonce
• Script::rotate_authentication_key_with_recovery_address

RotateAuthenticationKeyWithRecoveryAddress

Fields

recovery_address: AccountAddress

to_recover: AccountAddress

new_key: Vec<u8>

Summary

Rotates the authentication key of a specified account that is part of a recovery address to a new authentication key. Only used for accounts that are part of a recovery address (see Script::add_recovery_rotation_capability for account restrictions).

Technical Description

Rotates the authentication key of the to_recover account to new_key using the DiemAccount::KeyRotationCapability stored in the RecoveryAddress::RecoveryAddress resource published under recovery_address. This transaction can be sent either by the to_recover account, or by the account where the RecoveryAddress::RecoveryAddress resource is published that contains to_recover’s DiemAccount::KeyRotationCapability.

Parameters

Name	Type	Description
account	&signer	Signer reference of the sending account of the transaction.
recovery_address	address	Address where RecoveryAddress::RecoveryAddress that holds to_recover’s DiemAccount::KeyRotationCapability is published.
to_recover	address	The address of the account whose authentication key will be updated.
new_key	vector<u8>	New ed25519 public key to be used for the account at the to_recover address.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	RecoveryAddress::ERECOVERY_ADDRESS	recovery_address does not have a RecoveryAddress::RecoveryAddress resource published under it.
Errors::INVALID_ARGUMENT	RecoveryAddress::ECANNOT_ROTATE_KEY	The address of account is not recovery_address or to_recover.
Errors::INVALID_ARGUMENT	RecoveryAddress::EACCOUNT_NOT_RECOVERABLE	to_recover’s DiemAccount::KeyRotationCapability is not in the RecoveryAddress::RecoveryAddress resource published under recovery_address.
Errors::INVALID_ARGUMENT	DiemAccount::EMALFORMED_AUTHENTICATION_KEY	new_key was an invalid length.

Related Scripts

• Script::rotate_authentication_key
• Script::rotate_authentication_key_with_nonce
• Script::rotate_authentication_key_with_nonce_admin

RotateDualAttestationInfo

Fields

new_url: Vec<u8>

new_key: Vec<u8>

Summary

Updates the url used for off-chain communication, and the public key used to verify dual attestation on-chain. Transaction can be sent by any account that has dual attestation information published under it. In practice the only such accounts are Designated Dealers and Parent VASPs.

Technical Description

Updates the base_url and compliance_public_key fields of the DualAttestation::Credential resource published under account. The new_key must be a valid ed25519 public key.

Events

Successful execution of this transaction emits two events:

• A DualAttestation::ComplianceKeyRotationEvent containing the new compliance public key, and the blockchain time at which the key was updated emitted on the DualAttestation::Credential compliance_key_rotation_events handle published under account; and
• A DualAttestation::BaseUrlRotationEvent containing the new base url to be used for off-chain communication, and the blockchain time at which the url was updated emitted on the DualAttestation::Credential base_url_rotation_events handle published under account.

Parameters

Name	Type	Description
account	&signer	Signer reference of the sending account of the transaction.
new_url	vector<u8>	ASCII-encoded url to be used for off-chain communication with account.
new_key	vector<u8>	New ed25519 public key to be used for on-chain dual attestation checking.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	DualAttestation::ECREDENTIAL	A DualAttestation::Credential resource is not published under account.
Errors::INVALID_ARGUMENT	DualAttestation::EINVALID_PUBLIC_KEY	new_key is not a valid ed25519 public key.

Related Scripts

• Script::create_parent_vasp_account
• Script::create_designated_dealer
• Script::rotate_dual_attestation_info

RotateSharedEd25519PublicKey

Fields

public_key: Vec<u8>

Summary

Rotates the authentication key in a SharedEd25519PublicKey. This transaction can be sent by any account that has previously published a shared ed25519 public key using Script::publish_shared_ed25519_public_key.

Technical Description

This first rotates the public key stored in account’s SharedEd25519PublicKey::SharedEd25519PublicKey resource to public_key, after which it rotates the authentication key using the capability stored in account’s SharedEd25519PublicKey::SharedEd25519PublicKey to a new value derived from public_key

Parameters

Name	Type	Description
account	&signer	The signer reference of the sending account of the transaction.
public_key	vector<u8>	32-byte Ed25519 public key.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SharedEd25519PublicKey::ESHARED_KEY	A SharedEd25519PublicKey::SharedEd25519PublicKey resource is not published under account.
Errors::INVALID_ARGUMENT	SharedEd25519PublicKey::EMALFORMED_PUBLIC_KEY	public_key is an invalid ed25519 public key.

Related Scripts

• Script::publish_shared_ed25519_public_key

SetValidatorConfigAndReconfigure

Fields

validator_account: AccountAddress

consensus_pubkey: Vec<u8>

validator_network_addresses: Vec<u8>

fullnode_network_addresses: Vec<u8>

Summary

Updates a validator’s configuration, and triggers a reconfiguration of the system to update the validator set with this new validator configuration. Can only be successfully sent by a Validator Operator account that is already registered with a validator.

Technical Description

This updates the fields with corresponding names held in the ValidatorConfig::ValidatorConfig config resource held under validator_account. It then emits a DiemConfig::NewEpochEvent to trigger a reconfiguration of the system. This reconfiguration will update the validator set on-chain with the updated ValidatorConfig::ValidatorConfig.

Parameters

Name	Type	Description
validator_operator_account	&signer	Signer reference of the sending account. Must be the registered validator operator for the validator at validator_address.
validator_account	address	The address of the validator’s ValidatorConfig::ValidatorConfig resource being updated.
consensus_pubkey	vector<u8>	New Ed25519 public key to be used in the updated ValidatorConfig::ValidatorConfig.
validator_network_addresses	vector<u8>	New set of validator_network_addresses to be used in the updated ValidatorConfig::ValidatorConfig.
fullnode_network_addresses	vector<u8>	New set of fullnode_network_addresses to be used in the updated ValidatorConfig::ValidatorConfig.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	ValidatorConfig::EVALIDATOR_CONFIG	validator_address does not have a ValidatorConfig::ValidatorConfig resource published under it.
Errors::REQUIRES_ROLE	Roles::EVALIDATOR_OPERATOR	validator_operator_account does not have a Validator Operator role.
Errors::INVALID_ARGUMENT	ValidatorConfig::EINVALID_TRANSACTION_SENDER	validator_operator_account is not the registered operator for the validator at validator_address.
Errors::INVALID_ARGUMENT	ValidatorConfig::EINVALID_CONSENSUS_KEY	consensus_pubkey is not a valid ed25519 public key.
Errors::INVALID_STATE	DiemConfig::EINVALID_BLOCK_TIME	An invalid time value was encountered in reconfiguration. Unlikely to occur.

Related Scripts

• Script::create_validator_account
• Script::create_validator_operator_account
• Script::add_validator_and_reconfigure
• Script::remove_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_operator_with_nonce_admin
• Script::register_validator_config

SetValidatorOperator

Fields

operator_name: Vec<u8>

operator_account: AccountAddress

Summary

Sets the validator operator for a validator in the validator’s configuration resource “locally” and does not reconfigure the system. Changes from this transaction will not picked up by the system until a reconfiguration of the system is triggered. May only be sent by an account with Validator role.

Technical Description

Sets the account at operator_account address and with the specified human_name as an operator for the sending validator account. The account at operator_account address must have a Validator Operator role and have a ValidatorOperatorConfig::ValidatorOperatorConfig resource published under it. The sending account must be a Validator and have a ValidatorConfig::ValidatorConfig resource published under it. This script does not emit a DiemConfig::NewEpochEvent and no reconfiguration of the system is initiated by this script.

Parameters

Name	Type	Description
account	&signer	The signer reference of the sending account of the transaction.
operator_name	vector<u8>	Validator operator’s human name.
operator_account	address	Address of the validator operator account to be added as the account validator’s operator.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	ValidatorOperatorConfig::EVALIDATOR_OPERATOR_CONFIG	The ValidatorOperatorConfig::ValidatorOperatorConfig resource is not published under operator_account.
0	0	The human_name field of the ValidatorOperatorConfig::ValidatorOperatorConfig resource under operator_account does not match the provided human_name.
Errors::REQUIRES_ROLE	Roles::EVALIDATOR	account does not have a Validator account role.
Errors::INVALID_ARGUMENT	ValidatorConfig::ENOT_A_VALIDATOR_OPERATOR	The account at operator_account does not have a ValidatorOperatorConfig::ValidatorOperatorConfig resource.
Errors::NOT_PUBLISHED	ValidatorConfig::EVALIDATOR_CONFIG	A ValidatorConfig::ValidatorConfig is not published under account.

Related Scripts

• Script::create_validator_account
• Script::create_validator_operator_account
• Script::register_validator_config
• Script::remove_validator_and_reconfigure
• Script::add_validator_and_reconfigure
• Script::set_validator_operator_with_nonce_admin
• Script::set_validator_config_and_reconfigure

SetValidatorOperatorWithNonceAdmin

Fields

sliding_nonce: u64

operator_name: Vec<u8>

operator_account: AccountAddress

Summary

Sets the validator operator for a validator in the validator’s configuration resource “locally” and does not reconfigure the system. Changes from this transaction will not picked up by the system until a reconfiguration of the system is triggered. May only be sent by the Diem Root account as a write set transaction.

Technical Description

Sets the account at operator_account address and with the specified human_name as an operator for the validator account. The account at operator_account address must have a Validator Operator role and have a ValidatorOperatorConfig::ValidatorOperatorConfig resource published under it. The account represented by the account signer must be a Validator and have a ValidatorConfig::ValidatorConfig resource published under it. No reconfiguration of the system is initiated by this script.

Parameters

Name	Type	Description
dr_account	&signer	The signer reference of the sending account of the write set transaction. May only be the Diem Root signer.
account	&signer	Signer reference of account specified in the execute_as field of the write set transaction.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction for Diem Root.
operator_name	vector<u8>	Validator operator’s human name.
operator_account	address	Address of the validator operator account to be added as the account validator’s operator.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under dr_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce in dr_account is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce in dr_account is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce in dr_account has been previously recorded.
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	The sending account is not the Diem Root account or Treasury Compliance account
Errors::NOT_PUBLISHED	ValidatorOperatorConfig::EVALIDATOR_OPERATOR_CONFIG	The ValidatorOperatorConfig::ValidatorOperatorConfig resource is not published under operator_account.
0	0	The human_name field of the ValidatorOperatorConfig::ValidatorOperatorConfig resource under operator_account does not match the provided human_name.
Errors::REQUIRES_ROLE	Roles::EVALIDATOR	account does not have a Validator account role.
Errors::INVALID_ARGUMENT	ValidatorConfig::ENOT_A_VALIDATOR_OPERATOR	The account at operator_account does not have a ValidatorOperatorConfig::ValidatorOperatorConfig resource.
Errors::NOT_PUBLISHED	ValidatorConfig::EVALIDATOR_CONFIG	A ValidatorConfig::ValidatorConfig is not published under account.

Related Scripts

• Script::create_validator_account
• Script::create_validator_operator_account
• Script::register_validator_config
• Script::remove_validator_and_reconfigure
• Script::add_validator_and_reconfigure
• Script::set_validator_operator
• Script::set_validator_config_and_reconfigure

TieredMint

Fields

coin_type: TypeTag

sliding_nonce: u64

designated_dealer_address: AccountAddress

mint_amount: u64

tier_index: u64

Summary

Mints a specified number of coins in a currency to a Designated Dealer. The sending account must be the Treasury Compliance account, and coins can only be minted to a Designated Dealer account.

Technical Description

Mints mint_amount of coins in the CoinType currency to Designated Dealer account at designated_dealer_address. The tier_index parameter specifies which tier should be used to check verify the off-chain approval policy, and is based in part on the on-chain tier values for the specific Designated Dealer, and the number of CoinType coins that have been minted to the dealer over the past 24 hours. Every Designated Dealer has 4 tiers for each currency that they support. The sending tc_account must be the Treasury Compliance account, and the receiver an authorized Designated Dealer account.

Events

Successful execution of the transaction will emit two events:

• A Diem::MintEvent with the amount and currency code minted is emitted on the mint_event_handle in the stored Diem::CurrencyInfo<CoinType> resource stored under 0xA550C18; and
• A DesignatedDealer::ReceivedMintEvent with the amount, currency code, and Designated Dealer’s address is emitted on the mint_event_handle in the stored DesignatedDealer::Dealer resource published under the designated_dealer_address.

Parameters

Name	Type	Description
CoinType	Type	The Move type for the CoinType being minted. CoinType must be an already-registered currency on-chain.
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
designated_dealer_address	address	The address of the Designated Dealer account being minted to.
mint_amount	u64	The number of coins to be minted.
tier_index	u64	The mint tier index to use for the Designated Dealer account.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under tc_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	tc_account is not the Treasury Compliance account.
Errors::REQUIRES_ROLE	Roles::ETREASURY_COMPLIANCE	tc_account is not the Treasury Compliance account.
Errors::INVALID_ARGUMENT	DesignatedDealer::EINVALID_MINT_AMOUNT	mint_amount is zero.
Errors::NOT_PUBLISHED	DesignatedDealer::EDEALER	DesignatedDealer::Dealer or DesignatedDealer::TierInfo<CoinType> resource does not exist at designated_dealer_address.
Errors::INVALID_ARGUMENT	DesignatedDealer::EINVALID_TIER_INDEX	The tier_index is out of bounds.
Errors::INVALID_ARGUMENT	DesignatedDealer::EINVALID_AMOUNT_FOR_TIER	mint_amount exceeds the maximum allowed amount for tier_index.
Errors::REQUIRES_CAPABILITY	Diem::EMINT_CAPABILITY	tc_account does not have a Diem::MintCapability<CoinType> resource published under it.
Errors::INVALID_STATE	Diem::EMINTING_NOT_ALLOWED	Minting is not currently allowed for CoinType coins.
Errors::LIMIT_EXCEEDED	DiemAccount::EDEPOSIT_EXCEEDS_LIMITS	The depositing of the funds would exceed the account’s account limits.

Related Scripts

• Script::create_designated_dealer
• Script::peer_to_peer_with_metadata
• Script::rotate_dual_attestation_info

UnfreezeAccount

Fields

sliding_nonce: u64

to_unfreeze_account: AccountAddress

Summary

Unfreezes the account at address. The sending account of this transaction must be the Treasury Compliance account. After the successful execution of this transaction transactions may be sent from the previously frozen account, and coins may be sent and received.

Technical Description

Sets the AccountFreezing::FreezingBit to false and emits a AccountFreezing::UnFreezeAccountEvent. The transaction sender must be the Treasury Compliance account. Note that this is a per-account property so unfreezing a Parent VASP will not effect the status any of its child accounts and vice versa.

Events

Successful execution of this script will emit a AccountFreezing::UnFreezeAccountEvent with the unfrozen_address set the to_unfreeze_account’s address.

Parameters

Name	Type	Description
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
to_unfreeze_account	address	The account address to be frozen.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	The sending account is not the Treasury Compliance account.

Related Scripts

• Script::freeze_account

UpdateDiemVersion

Fields

sliding_nonce: u64

major: u64

Summary

Updates the Diem major version that is stored on-chain and is used by the VM. This transaction can only be sent from the Diem Root account.

Technical Description

Updates the DiemVersion on-chain config and emits a DiemConfig::NewEpochEvent to trigger a reconfiguration of the system. The major version that is passed in must be strictly greater than the current major version held on-chain. The VM reads this information and can use it to preserve backwards compatibility with previous major versions of the VM.

Parameters

Name	Type	Description
account	&signer	Signer reference of the sending account. Must be the Diem Root account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
major	u64	The major version of the VM to be used from this transaction on.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::EDIEM_ROOT	account is not the Diem Root account.
Errors::INVALID_ARGUMENT	DiemVersion::EINVALID_MAJOR_VERSION_NUMBER	major is less-than or equal to the current major version stored on-chain.

UpdateDualAttestationLimit

Fields

sliding_nonce: u64

new_micro_xdx_limit: u64

Summary

Update the dual attestation limit on-chain. Defined in terms of micro-XDX. The transaction can only be sent by the Treasury Compliance account. After this transaction all inter-VASP payments over this limit must be checked for dual attestation.

Technical Description

Updates the micro_xdx_limit field of the DualAttestation::Limit resource published under 0xA550C18. The amount is set in micro-XDX.

Parameters

Name	Type	Description
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for this transaction.
new_micro_xdx_limit	u64	The new dual attestation limit to be used on-chain.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under tc_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	tc_account is not the Treasury Compliance account.

Related Scripts

• Script::update_exchange_rate
• Script::update_minting_ability

UpdateExchangeRate

Fields

currency: TypeTag

sliding_nonce: u64

new_exchange_rate_numerator: u64

new_exchange_rate_denominator: u64

Summary

Update the rough on-chain exchange rate between a specified currency and XDX (as a conversion to micro-XDX). The transaction can only be sent by the Treasury Compliance account. After this transaction the updated exchange rate will be used for normalization of gas prices, and for dual attestation checking.

Technical Description

Updates the on-chain exchange rate from the given Currency to micro-XDX. The exchange rate is given by new_exchange_rate_numerator/new_exchange_rate_denominator.

Parameters

Name	Type	Description
Currency	Type	The Move type for the Currency whose exchange rate is being updated. Currency must be an already-registered currency on-chain.
tc_account	&signer	The signer reference of the sending account of this transaction. Must be the Treasury Compliance account.
sliding_nonce	u64	The sliding_nonce (see: SlidingNonce) to be used for the transaction.
new_exchange_rate_numerator	u64	The numerator for the new to micro-XDX exchange rate for Currency.
new_exchange_rate_denominator	u64	The denominator for the new to micro-XDX exchange rate for Currency.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::NOT_PUBLISHED	SlidingNonce::ESLIDING_NONCE	A SlidingNonce resource is not published under tc_account.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_OLD	The sliding_nonce is too old and it’s impossible to determine if it’s duplicated or not.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_TOO_NEW	The sliding_nonce is too far in the future.
Errors::INVALID_ARGUMENT	SlidingNonce::ENONCE_ALREADY_RECORDED	The sliding_nonce has been previously recorded.
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	tc_account is not the Treasury Compliance account.
Errors::REQUIRES_ROLE	Roles::ETREASURY_COMPLIANCE	tc_account is not the Treasury Compliance account.
Errors::INVALID_ARGUMENT	FixedPoint32::EDENOMINATOR	new_exchange_rate_denominator is zero.
Errors::INVALID_ARGUMENT	FixedPoint32::ERATIO_OUT_OF_RANGE	The quotient is unrepresentable as a FixedPoint32.
Errors::LIMIT_EXCEEDED	FixedPoint32::ERATIO_OUT_OF_RANGE	The quotient is unrepresentable as a FixedPoint32.

Related Scripts

• Script::update_dual_attestation_limit
• Script::update_minting_ability

UpdateMintingAbility

Fields

currency: TypeTag

allow_minting: bool

Summary

Script to allow or disallow minting of new coins in a specified currency. This transaction can only be sent by the Treasury Compliance account. Turning minting off for a currency will have no effect on coins already in circulation, and coins may still be removed from the system.

Technical Description

This transaction sets the can_mint field of the Diem::CurrencyInfo<Currency> resource published under 0xA550C18 to the value of allow_minting. Minting of coins if allowed if this field is set to true and minting of new coins in Currency is disallowed otherwise. This transaction needs to be sent by the Treasury Compliance account.

Parameters

Name	Type	Description
Currency	Type	The Move type for the Currency whose minting ability is being updated. Currency must be an already-registered currency on-chain.
account	&signer	Signer reference of the sending account. Must be the Diem Root account.
allow_minting	bool	Whether to allow minting of new coins in Currency.

Common Abort Conditions

Error Category	Error Reason	Description
Errors::REQUIRES_ADDRESS	CoreAddresses::ETREASURY_COMPLIANCE	tc_account is not the Treasury Compliance account.
Errors::NOT_PUBLISHED	Diem::ECURRENCY_INFO	Currency is not a registered currency on-chain.

Related Scripts

• Script::update_dual_attestation_limit
• Script::update_exchange_rate

Implementations

impl ScriptCall

pub fn encode(self) -> Script

Build a Diem Script from a structured object ScriptCall.

pub fn decode(script: &Script) -> Option<ScriptCall>

Try to recognize a Diem Script and convert it into a structured object ScriptCall.

pub fn name(&self) -> &'static str

Return the name of a Diem Script from a structured object ScriptCall.

Trait Implementations

impl Arbitrary for ScriptCall

type Parameters = ()

The type of parameters that arbitrary_with accepts for configuration of the generated Strategy. Parameters must implement Default.

type Strategy = TupleUnion<((u32, Arc<Map<<TypeTag as Arbitrary>::Strategy, fn(_: TypeTag) -> ScriptCall>>), (u32, Arc<Map<<AccountAddress as Arbitrary>::Strategy, fn(_: AccountAddress) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (u64, Vec<u8, Global>, AccountAddress)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (TypeTag, u64, AccountAddress)) -> ScriptCall>>), (u32, Arc<Map<<TypeTag as Arbitrary>::Strategy, fn(_: TypeTag) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (TypeTag, AccountAddress)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <bool as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy), fn(_: (TypeTag, AccountAddress, Vec<u8, Global>, bool, u64)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <bool as Arbitrary>::Strategy), fn(_: (TypeTag, u64, AccountAddress, Vec<u8, Global>, Vec<u8, Global>, bool)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <bool as Arbitrary>::Strategy), fn(_: (TypeTag, u64, AccountAddress, Vec<u8, Global>, Vec<u8, Global>, bool)) -> ScriptCall>>), (u32, Arc<TupleUnion<((u32, Arc<fn() -> ScriptCall>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (u64, AccountAddress, Vec<u8, Global>, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (u64, AccountAddress, Vec<u8, Global>, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (u64, AccountAddress)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (TypeTag, AccountAddress, u64, Vec<u8, Global>, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy), fn(_: (TypeTag, u64)) -> ScriptCall>>), (u32, Arc<Map<<Vec<u8, Global> as Arbitrary>::Strategy, fn(_: Vec<u8, Global>) -> ScriptCall>>), (u32, Arc<Map<(<AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (AccountAddress, Vec<u8, Global>, Vec<u8, Global>, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (u64, Vec<u8, Global>, AccountAddress)) -> ScriptCall>>), (u32, Arc<TupleUnion<((u32, Arc<Map<<Vec<u8, Global> as Arbitrary>::Strategy, fn(_: Vec<u8, Global>) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (u64, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (u64, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<AccountAddress as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (AccountAddress, AccountAddress, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (Vec<u8, Global>, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<<Vec<u8, Global> as Arbitrary>::Strategy, fn(_: Vec<u8, Global>) -> ScriptCall>>), (u32, Arc<Map<(<AccountAddress as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy), fn(_: (AccountAddress, Vec<u8, Global>, Vec<u8, Global>, Vec<u8, Global>)) -> ScriptCall>>), (u32, Arc<Map<(<Vec<u8, Global> as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (Vec<u8, Global>, AccountAddress)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <Vec<u8, Global> as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (u64, Vec<u8, Global>, AccountAddress)) -> ScriptCall>>), (u32, Arc<TupleUnion<((u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy), fn(_: (TypeTag, u64, AccountAddress, u64, u64)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <AccountAddress as Arbitrary>::Strategy), fn(_: (u64, AccountAddress)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy), fn(_: (u64, u64)) -> ScriptCall>>), (u32, Arc<Map<(<u64 as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy), fn(_: (u64, u64)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy, <u64 as Arbitrary>::Strategy), fn(_: (TypeTag, u64, u64, u64)) -> ScriptCall>>), (u32, Arc<Map<(<TypeTag as Arbitrary>::Strategy, <bool as Arbitrary>::Strategy), fn(_: (TypeTag, bool)) -> ScriptCall>>))>>))>>))>>))>

The type of Strategy used to generate values of type Self.

fn arbitrary_with(_top: Self::Parameters) -> Self::Strategy

Generates a Strategy for producing arbitrary values of type the implementing type (Self). The strategy is passed the arguments given in args.

fn arbitrary() -> Self::Strategy

Generates a Strategy for producing arbitrary values of type the implementing type (Self).

impl Clone for ScriptCall

fn clone(&self) -> ScriptCall

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ScriptCall

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<ScriptCall> for ScriptCall

fn eq(&self, other: &ScriptCall) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<ScriptCall> for ScriptCall

fn partial_cmp(&self, other: &ScriptCall) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl StructuralPartialEq for ScriptCall