Enum state_sync_v1::chunk_request::TargetType
source · pub enum TargetType {
TargetLedgerInfo(LedgerInfoWithSignatures),
HighestAvailable {
target_li: Option<LedgerInfoWithSignatures>,
timeout_ms: u64,
},
Waypoint(Version),
}
Expand description
We’re currently considering several types of chunk requests depending on the information available on the requesting side.
Variants§
TargetLedgerInfo(LedgerInfoWithSignatures)
The response is built relative to the target (or end of epoch).
DEPRECATED: TargetLedgerInfo
is only required for backward compatibility. State sync
avoids sending these target types and instead uses HighestAvailable
below. This message
will be removed on the next breaking release: https://github.com/diem/diem/issues/8013
HighestAvailable
The response is built relative to the highest available LedgerInfo (or end of epoch). The value specifies the timeout in ms to wait for an available response. This “long poll” approach allows a responding node to add the request to the list of its subscriptions for the duration of a timeout until some new information becomes available.
target_li
: While asking for the highest available ledger info, this request also provides
the option to the sync requester to specify a target LI.
This is to support the scenario where the sync requester is lagging too much behind the responding node
in the sync process. If the highest ledger info version keeps advancing on the responding node,
even though the sync requester continues to receive and sync txns, those txns will never be backed an LI,
since a LI can only be committed once all the transactions up to the LI’s version has been received.
(It is important for a transaction to be backed by an LI, because transactions need to be backed by an LI
to be shown as committed upon storage query)
To prevent the above problem where the transactions are never backed by a LI during sync catch-up
(or the difference between synced version and committed LI version keeps growing on sync requester),
this TargetType
can simultaneously (1) ask for the highest ledger info, and (2) specify a target
to build the requested transactions w.r.t.. With (1), the sync requester can store the LI later to target-sync
once it is ready for that LI after syncing to an earlier target LI via (2).
If target_li
is not specified, the responding node will build the responses against its highest LI
Waypoint(Version)
The response is built relative to a LedgerInfo at a given version.
Implementations§
Trait Implementations§
source§impl Arbitrary for TargetType
impl Arbitrary for TargetType
§type Parameters = ()
type Parameters = ()
arbitrary_with
accepts for configuration
of the generated Strategy
. Parameters must implement Default
.source§fn arbitrary_with(_args: ()) -> Self::Strategy
fn arbitrary_with(_args: ()) -> Self::Strategy
§type Strategy = BoxedStrategy<TargetType>
type Strategy = BoxedStrategy<TargetType>
Strategy
used to generate values of type Self
.source§impl Clone for TargetType
impl Clone for TargetType
source§fn clone(&self) -> TargetType
fn clone(&self) -> TargetType
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for TargetType
impl Debug for TargetType
source§impl<'de> Deserialize<'de> for TargetType
impl<'de> Deserialize<'de> for TargetType
source§fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where __D: Deserializer<'de>,
source§impl Display for TargetType
impl Display for TargetType
source§impl PartialEq<TargetType> for TargetType
impl PartialEq<TargetType> for TargetType
source§fn eq(&self, other: &TargetType) -> bool
fn eq(&self, other: &TargetType) -> bool
self
and other
values to be equal, and is used
by ==
.source§impl Serialize for TargetType
impl Serialize for TargetType
impl Eq for TargetType
impl StructuralEq for TargetType
impl StructuralPartialEq for TargetType
Auto Trait Implementations§
impl RefUnwindSafe for TargetType
impl Send for TargetType
impl Sync for TargetType
impl Unpin for TargetType
impl UnwindSafe for TargetType
Blanket Implementations§
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> Conv for T
impl<T> Conv for T
source§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key
and return true
if they are equal.§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> PersistableConfig for Twhere
T: Serialize + DeserializeOwned + ?Sized,
impl<T> PersistableConfig for Twhere T: Serialize + DeserializeOwned + ?Sized,
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,
self
, then passes self.as_mut()
into the pipe
function.§impl<T> Pipe for T
impl<T> Pipe for T
§impl<T> PipeAsRef for T
impl<T> PipeAsRef for T
§impl<T> PipeBorrow for T
impl<T> PipeBorrow for T
§impl<T> PipeDeref for T
impl<T> PipeDeref for T
§impl<T> PipeRef for T
impl<T> PipeRef for T
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,
§fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,
§impl<T> Pointable for T
impl<T> Pointable for T
source§impl<T> Serialize for Twhere
T: Serialize + ?Sized,
impl<T> Serialize for Twhere T: Serialize + ?Sized,
fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<Ok, Error>
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§impl<T> Tap for T
impl<T> Tap for T
§fn tap<F, R>(self, func: F) -> Selfwhere
F: FnOnce(&Self) -> R,
fn tap<F, R>(self, func: F) -> Selfwhere F: FnOnce(&Self) -> R,
§fn tap_dbg<F, R>(self, func: F) -> Selfwhere
F: FnOnce(&Self) -> R,
fn tap_dbg<F, R>(self, func: F) -> Selfwhere F: FnOnce(&Self) -> R,
tap
in debug builds, and does nothing in release builds.§fn tap_mut<F, R>(self, func: F) -> Selfwhere
F: FnOnce(&mut Self) -> R,
fn tap_mut<F, R>(self, func: F) -> Selfwhere F: FnOnce(&mut Self) -> R,
§fn tap_mut_dbg<F, R>(self, func: F) -> Selfwhere
F: FnOnce(&mut Self) -> R,
fn tap_mut_dbg<F, R>(self, func: F) -> Selfwhere F: FnOnce(&mut Self) -> R,
tap_mut
in debug builds, and does nothing in release builds.§impl<T, U> TapAsRef<U> for Twhere
U: ?Sized,
impl<T, U> TapAsRef<U> for Twhere U: ?Sized,
§fn tap_ref<F, R>(self, func: F) -> Selfwhere
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref<F, R>(self, func: F) -> Selfwhere Self: AsRef<T>, F: FnOnce(&T) -> R,
§fn tap_ref_dbg<F, R>(self, func: F) -> Selfwhere
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref_dbg<F, R>(self, func: F) -> Selfwhere Self: AsRef<T>, F: FnOnce(&T) -> R,
tap_ref
in debug builds, and does nothing in release builds.§fn tap_ref_mut<F, R>(self, func: F) -> Selfwhere
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut<F, R>(self, func: F) -> Selfwhere Self: AsMut<T>, F: FnOnce(&mut T) -> R,
§fn tap_ref_mut_dbg<F, R>(self, func: F) -> Selfwhere
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Selfwhere Self: AsMut<T>, F: FnOnce(&mut T) -> R,
tap_ref_mut
in debug builds, and does nothing in release builds.§impl<T, U> TapBorrow<U> for Twhere
U: ?Sized,
impl<T, U> TapBorrow<U> for Twhere U: ?Sized,
§fn tap_borrow<F, R>(self, func: F) -> Selfwhere
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow<F, R>(self, func: F) -> Selfwhere Self: Borrow<T>, F: FnOnce(&T) -> R,
§fn tap_borrow_dbg<F, R>(self, func: F) -> Selfwhere
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow_dbg<F, R>(self, func: F) -> Selfwhere Self: Borrow<T>, F: FnOnce(&T) -> R,
tap_borrow
in debug builds, and does nothing in release builds.§fn tap_borrow_mut<F, R>(self, func: F) -> Selfwhere
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Selfwhere Self: BorrowMut<T>, F: FnOnce(&mut T) -> R,
§fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Selfwhere
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Selfwhere Self: BorrowMut<T>, F: FnOnce(&mut T) -> R,
tap_borrow_mut
in debug builds, and does nothing in release
builds.§impl<T> TapDeref for T
impl<T> TapDeref for T
§fn tap_deref<F, R>(self, func: F) -> Selfwhere
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref<F, R>(self, func: F) -> Selfwhere Self: Deref, F: FnOnce(&Self::Target) -> R,
self
for inspection.§fn tap_deref_dbg<F, R>(self, func: F) -> Selfwhere
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Selfwhere Self: Deref, F: FnOnce(&Self::Target) -> R,
tap_deref
in debug builds, and does nothing in release builds.§fn tap_deref_mut<F, R>(self, func: F) -> Selfwhere
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Selfwhere Self: DerefMut, F: FnOnce(&mut Self::Target) -> R,
self
for modification.§fn tap_deref_mut_dbg<F, R>(self, func: F) -> Selfwhere
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Selfwhere Self: DerefMut, F: FnOnce(&mut Self::Target) -> R,
tap_deref_mut
in debug builds, and does nothing in release
builds.